MINOLTA-QMS ENord magicolor 3100 User Manual Download Page 154

Page: 154 / 204

Deinstalling the High-capacity Input Feeder (HCIF)

148

Replace the rear tray cover.

With the help of another person, lift
the printer by its carrying grips from
the HCIF, and place the printer on a
flat surface.

WARNING!

Your printer weighs approximately 77 lbs (35 kg) fully assembled. Be
sure to have help when lifting and moving it.

ACHTUNG! Das Gewicht dieses Druckers beträgt ohne
Verbrauchsmaterial ca. 35 kg. Bitte versuchen Sie niemals, den Drucker
alleine anzuheben oder zu transportieren.

Repack the HCIF in its original shipping carton for storage or shipment.

If you’re returning the printer for service, you don’t need to return
the high-capacity input feeder unless instructed to do so.

ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for ENord magicolor 3100













































































































































































































Search results

Summary of Contents for ENord magicolor 3100

Reviews:

Brands by name

Popular brands

MINOLTA-QMS ENord magicolor 3100, User Manual

Search results

Summary of Contents for ENord magicolor 3100

Reviews:

Brands by name

Popular brands