MINOLTA-QMS ENord magicolor 3100, User Manual

Page: 38 / 204

Media 32
Media
„
Try printing your data on a plain sheet of paper first to check placement.
„
All media is fed on the short edge.
„
Test any stock thicker than 24 lb bond (90 g/m²) to ensure that its
performance is acceptable. You should test the number of sheets of thick
stock a media tray can hold to ensure that its performance is acceptable.
„
Select Single User Mode or Network Mode (job modes) to specify
how media type requests are handled. For more information, refer to
the
CrownBooks in PDF format on the Software Utilities CD-ROM.
–
In Single User Mode, you can select the media type and size from
the drivers. The driver will overwrite any settings on the printer.
–
In Network Mode, if special media is not selected in both the driver
and from the printer’s control panel, the printer uses plain paper
settings.
„
Select print quality to control the speed of printing, the fuser
temperature, and the amount of toner gloss.
„
Select the media type.
Why have different print qualities?
The specific print quality that is best depends upon your particular needs,
for example, you can control the the amount of toner gloss.
Which print quality is best?
Print
Quality Resolution:
Dots per Inch
(dpi) Speed Comment
Standard 600 x 600 Full If getting your jobs printed in a
timely manner is most important.
Quality 1200 x 1200 Full If getting your jobs printed with
more gloss and better quality is
most important.
Fine 1200 x 1200 Half If getting your jobs printed with
more gloss and best quality is
most important.
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500