manualshive.com logo in svg

MINOLTA-QMS ENord magicolor 3100, User Manual

Share
Download
MINOLTA-QMS ENord magicolor 3100 User Manual Download Page 45

Media 

39

Postcards (Japanese size) 

Notes

„

Format label data within your application. Try printing your 
data on a plain sheet of paper first to check placement. 

„

Avoid using labels with exposed adhesive; it may stick to 
the fuser, causing labels to peel off and media jams to 
occur.

„

Adhesive label stock is supported only in letter or A4 
sheets.

„

A label consists of a face sheet (the printing surface), 
adhesive, and a carrier sheet

—

The face sheet must follow the plain paper 

specification.

—

The face sheet surface must cover the entire carrier 

sheet, and no adhesive should come through on the 
surface.

„

You can print continuously with label paper. However, this 
could affect the media feed, depending on the media 
quality and printing environment. If problems occur, stop 
the continuous print and print one sheet at a time.

„

Check your application documentation for other 
information on printing labels.

Media Type  Postcard

Input

Tray

Multipurpose tray only

Capacity

Up to 100 sheets, depending on the thickness of 
the postcards

Orientation

Face down

Approved 
Media 

Use only media approved for laser products. Check 
www.minolta-qms.com/support (click on Answer Base) for 
currently approved media. To order approved media, go to 
www.q-shop.com.

Duplexing

Not supported

ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for ENord magicolor 3100













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands