manualshive.com logo in svg

MIMAKI UJF-605RII, Operation Manual

Share
Download
MIMAKI UJF-605RII Operation Manual Download Page 91

- 3-9 -

Replacing the antifreezing liquid

STEPS:

1.

Touch the [FUNCTION] on the LOCAL

mode.

2.

Touch the JOG [ ] or [ ] to select the

[MAINTENANCE].

3.

Touch the [ENTER].

4.

Touch the JOG [ ] or [ ] to select the

[WATER CHNG].

5.

Touch the [ENTER].

6.

Touch the [ENTER] to start cooling down

the water heater.

• Do not touch the water heater until

[WASTE AF] is displayed to avoid a
burn injury. It may take 20 minutes for
the [WASTE AF] to be display if the
printer has been in use.

7.

Touch the [ENTER] when the [WASTE AF]

is displayed.

8.

Open the water heater cover.

WATER CHANGE

START

:ent

MAINTENANCE

WATER CHNG

< ent >

FUNCTION

MAINTENANCE

< ENT >

FUNCTION

DATA CLEAR

< ENT >

WATER CHANGE

PLEASE WAIT

WATER CHANGE

WASTE AF

:ent

MAINTENANCE

LIST

< ent >

Summary of Contents for UJF-605RII











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands