MIMAKI UJF-605RII Operation Manual Download Page 46

Page: 46 / 170

- 2-4 -

The LOCAL mode for roll media is dis-

played.

The tension for media turns on automatically and

the vacuum turns on.

For leaf media, touch the [Leaf Print].

The LOCAL mode for leaf media is displayed.

Turn on the power to the computer which

is connected to the printer.

Displaying the information

Display the printer information by touching [ENTER]. The following explains the procedure

for displaying information in LOCAL mode.

• Even in the REMOTE mode, you can display information by touching the

[ENTER].

Touch the [ENTER] in the LOCAL mode,

and the Ink remaining is displayed.

Touch the [ENTER], and the firmware

version and command version are dis-

played.

• Refer to “Information” in the [Mainte-

nance Functions] item for the printer
information.
(

P.5-32 )

REMAIN

KCMYcmW

:12345678

V1.10 / MRL-2B

Summary of Contents for UJF-605RII











































































































































































Search results

Summary of Contents for UJF-605RII

Reviews:

Brands by name

Popular brands

MIMAKI UJF-605RII, Operation Manual

Search results

Summary of Contents for UJF-605RII

Reviews:

Brands by name

Popular brands