MIMAKI UJF-605RII Operation Manual Download Page 128

Page: 128 / 170

- 5-14 -

Changing the Ink [INK CHANGE]

Ink exchanging is performed as follows:

Used tool: Washing liquid (SPC-0371FS)

STEPS:

Touch the JOG [ ] or [ ] to select the [INK

CANGE].

Touch the [ENTER].

Touch the JOG [ ] or [ ] to select a color

of ink which is changed.

Touch the JOG [ ] or [ ] to display the

print head colors must be changed.

Put symbol [ * ] for colors not to be changed.

Touch the [ENTER].

Remove the ink cartridges.

Discharge the filled ink to the waste ink tank.

When the display shown on the right

appears, set the washing liquid cartridges.

Touch the [ENTER].

The washing liquid is suctioned up.

• The washing liquid cartridge is sepa-

rately available from your local dis-
tributor.

MAINTENANCE
INK CHANGE

< ent >

∗∗

WASHING

∗∗

PLEASE WAIT

INK CHANGE
SET CLEAN TOOL

∗∗

WASHING

∗∗

PLEASE WAIT

INK CHANGE
REMOVE CARTRIDGE

INK CHANGE
COLOR

∗

CMY

∗

INK CHANGE
COLOR

:KCMYcmW

INK CHANGE
COLOR

:KCMYcmW

Summary of Contents for UJF-605RII











































































































































































Search results

Summary of Contents for UJF-605RII

Reviews:

Brands by name

Popular brands

MIMAKI UJF-605RII, Operation Manual

Search results

Summary of Contents for UJF-605RII

Reviews:

Brands by name

Popular brands