MIMAKI UJF-605RII, Operation Manual

Page: 118 / 170

- 5-4 -
STEPS:
1. Place a piece of paper whose size is 297 x
210 mm or larger with the long size set
horizontally on the table, and set the
origin.
2. Select the [MAINTENANCE] from the
[FUNCTION] mode.
3. Select the [PRINT ADJ].
4. Touch the [ENTER].
When Media Thickness is Changed [PRINT ADJUST]
Make sure to correct the dot position to print propery.
The dot position is corrected by comparing the ink dropping positions on each of the six
test patterns.
After adjusting the head height, be sure to adjust the dot position.
MAINTENANCE
PRINT ADJ
< ent >
PRINT ADJUST
PRINT START
: ent
0 +5 -5 +10 +15 -15 -10
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Pattern 6
Print direction
Head moving direction