manualshive.com logo in svg

MIMAKI UJF-605RII, Operation Manual

Share
Download
MIMAKI UJF-605RII Operation Manual Download Page 117

- 5-3 -

Printing out the Printing Conditions [LIST]

The current printing conditions of the printer are printed.

This is useful in carrying out maintenance of the printer.

1. Information about [SET UP] of the functions.

2. Information about [PRINT ADJUST] of the functions.

3. Information about the fireware version in use.

4. [PARAMETER] is a setting value needed for maintenance (by service engineers)

• Use 297mm x 210mm or larger size sheet with the long side set horizon-

tally.

STEPS:

1.

Set a sheet of paper, use 297mm x 210mm

or larger size with the long side set hori-

zontally, and set the Origin.

2.

Select the [LIST] from the [MAINTENANCE].

3.

Touch the [ENTER].

The list will be printed automatically.

4.

Touch the [END] twice, and the device

returns to the LOCAL mode.

MAINTENANCE
LIST

< ent >

* * LIST * *

<< LOCAL >>

Summary of Contents for UJF-605RII











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands