manualshive.com logo in svg

MIMAKI UJF-605RII, Operation Manual

Share
Download
MIMAKI UJF-605RII Operation Manual Download Page 86

- 3-4 -

7.

Open the right maintenance cover.

•

When opening the cover, make sure
to hold the cover with a holding bar.
Otherwise the cover may fall down
and it may cause some injuries.

8.

Clean the suction nozzle using the exclu-

sive cleaning swab moistened with the

washing liquid.

• Carefully clean the suction nozzle.

• Replace the suctions nozzle that is

severely contaminated or bent. Con-
tact your nearest sales agency or
MIMAKI sales office.

• Contact your nearest sales agency or

MIMAKI sales office to order additional
cleaning swab.

9.

Wipe off the adherent ink which got on the

cap rubber or inside the suction nozzle

cover with the exclusive cleaning swab.

10. Close the right maintenance cover and then

touch the [ENTER].

The initial operation is performed, then the printer

returns to the LOCAL mode.

Holding bar

Suction nozzle cover

STATION

COMPLETED

: ent

PLEASE  WAIT

<< LOCAL >>

Summary of Contents for UJF-605RII











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands