manualshive.com logo in svg

MIMAKI UJF-605RII, Operation Manual

Share
Download
MIMAKI UJF-605RII Operation Manual Download Page 33

- 1-11 -

Flushing Tray

A flushing tray is inside of the left maintenance cover in front of the printer.

When the printing heads executes flushing operation, waste ink is collected in the flushing

tray. Clean the waste ink regularly.  (

 P.3-5)

•  Do not put any flammable items on the flushing tray to prevent fire danger

by heat of the UV lamp.

Head height adjustment rod

When a media is set on the device for the first time or when a media different in thickness

from the current media is set on the device, it is necessary to adjust the height of the table.

• If the device is operated without adjusting the head height, the heads may

get caught on the media, causing damage to the heads.

• For the method of head height adjustment, see “Setting Media”. (

P.2.8)

Print head

Head height adjustment rod

Measures the thickness
of the medium to be used
as a reference for head
height adjustment.

Summary of Contents for UJF-605RII











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands