MIMAKI UJF-605RII, Operation Manual

Page: 136 / 170

- 5-22 -
Adjusting UV light level [Switching-over of HIGH, NORMAL and LOW]
STEPS:
1. Touch the [FUNCTION] in the LOCAL
mode.
2. Touch the JOG [ ] to select the [SETUP] .
3. Touch the [ENTER] twice.
4. Touch the JOG [ ] to select the [UV
LEVEL].
5. Touch the [ENTER].
6. Select the light level by touching the JOG
[ ] or [ ].
This display at the right indicates the [LAYER].
When selecting the other one except for the
[LAYER], follow the procedure from STEP10.
When [NO PRINT] is selected:
Select the light level by touching the JOG
[ ] or [ ].
Select from [HIGH], [NORMAL] and [LOW].
7. Touch the [ENTER].
TYPE *
UV LEVEL
:NORMAL
TYPE *
UV LEVEL
<ent>
FUNCTION
SET UP
<ENT>
FUNCTION
DATA CLEAR
<ENT>
TYPE *
QUALITY
<ent>
TYPE *
UV LEVEL
:LAYER
TYPE *
LAYER 1
:HIGH
TYPE *
NO PRINT
:NORMAL