MIMAKI TS34-1800A, Maintenance Manual

Page: 8 / 262

© 2011 MIMAKI ENGINEERING CO.,LTD. 1.1.2 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Operating Principle > Basic Operation > Sub Switch Power ON
Model TS34-1800A Issued 2011.10.17 Revised F/W ver. 1.20 Remark
1.0
Rev.
R.1.0
1.1.2 Sub Switch Power ON
 Indication on LCD
 Processing sequence
Step Processing Description
Indication
on LCD
1 Initial setting of CPU and H/W
2 Display at sub switch power ON 1. [PLEASE WAIT] is displayed. 
3 Voltage check 1. Check the power supply voltage on the main PCB assy.
• In the malfunction, [ERROR03 POWER **V] is displayed and the
system goes down.
4 FPGA setting 1. Execute the configuration of PDC and HDC.
• In the malfunction, [ERROR09 FPGA ERROR] is displayed and
the system goes down.
• When the fuse F13 of the main PCB assy is blown, the system shuts
down, displaying [ERROR205 42V HEAD VOLTAGE].
5 Version information display 1. Machine model name and main body firmware version are displayed.
2. “Revision” and “Boot/PDC/HDC version” are also displayed during
the service mode.
3. Special key function is workable during the version information is
being displayed. (Except firmware update)


6 Initial operation of the machine 1. See "1.1.3 Initial Machine Operation" .
P L EA S E W A I T T S 3 4 - 1 80 0 A V*.** TS 3 4 - 1 8 00 A V*.**.0
B*.* *P*.**H**.**
B: B o o t , P : P D C , H : H D C

Display at sub switch power ON

Version information display

Version information display
(during the service mode)