MIMAKI TS34-1800A Maintenance Manual Download Page 186

Page: 186 / 262

6.3.3

P.2

6.3.3 Y Drive Pulley

3. Manually move the print head carriage on the platen and

remove the

D-BKT cover

4. Loosen the screws from the Y-SP plate on the left side of the

main body, and release the tension of the Y drive belt.

5. Remove the screw from the top of the Y drive pulley.

6. Slide out the connection point of the Y drive belt, and remove

either the left or right

belt holder

from the

belt holder

Do not remove the screws.

Belt Holder

Do not remove the Y drive belt from the slider.

R.1.0

MAINTENANCE MANUAL > Disassemb ly and Reassembly > Drive System > Y Drive Pulley

Model

TS34-1800A

Issued 2011.10.17 Revised

F/W ver

1.20

Remark

1.0

Rev.

D-BKT Cover

Y Drive Belt33

Y-SP Plate

Loosen

Summary of Contents for TS34-1800A







































































































































































































































































Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands

MIMAKI TS34-1800A, Maintenance Manual

Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands