MIMAKI TS34-1800A Maintenance Manual Download Page 69

Page: 69 / 262

3.2.4

P.1

R.1.0

MAINTENANCE MANUAL > W orkflow > Driving Parts > Repl acement of the Linear Encoder Scale

Model

TS34-1800A

Issued 2011.10.17 Revised

F/W ver.

1.20

Remark

1.0

Rev.

3.2.4 Replacement of the Linear Encoder Scale



List of replacement procedures

Item

Work operation

Description

Ref.

Covers



Removal of covers, etc.

Remove the front cover, Y cover F, maintenance cover,
and head cover.

6.1.1

Linear
Encoder Scale



Removal of the linear encoder scale. Remove the linear encoder scale.

6.3.5



Removal of the protective film

Peel off the protective film from the encoder.



Mounting of the linear encoder
scale.

Mount the linear encoder scale.
Pay attention to the location of the encoder PCB assy.

Check



Encoder check

Carry out the encoder check to confirm it functions
normally.

4.3.4

5.1.26

Covers



Mounting of the covers.

Mount the covers that have been removed.

6.1.1

Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.

Linear Encoder Scale

Summary of Contents for TS34-1800A







































































































































































































































































Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands

MIMAKI TS34-1800A, Maintenance Manual

Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands