MIMAKI TS34-1800A Maintenance Manual Download

Page: 132 / 262

5.1.16

P.1

MAINTENANCE MANUAL > Test Items > Test Function > Paper Sensor

Model

TS34-1800A

Issued 2011.10.17 Revised

F/W ver

1.20

Remark

1.0

Rev.

R.1.0

5.1.16 Paper Sensor



Function

The paper sensor is tested.
Remove the cap(move the station to its lowest point), and then display the paper sensor read value.

*** (@@@,$$$)

@@@: Sensor read value during SLOP-ON

$$$

: Sensor read value during SLOP-OFF

***

: Difference between @@@ and $$$

The sensor read value is updated regularly (every 150 msec).

[



], [



] : Moves the head

[



], [



] : Moves alternately between the media right end position with paper and without paper.

[END] : After the cap is put back on, the paper sensor test is completed.

Summary of Contents for TS34-1800A







































































































































































































































































Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands

MIMAKI TS34-1800A, Maintenance Manual

Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands