MIMAKI TS34-1800A Maintenance Manual Download

Page: 168 / 262

6.2.2

P.2

6.2.2 Head Unit

8. Remove the damper joint Assy and wrap with waste cloth.

9. Place the waste cloth around the head unit so as not to

contaminate the platen.

10. Remove the screws and the head.

11. Remove the damper.

12. Remove the 34 print head cover.

13. Remove the mini memory PCB.

Wrap with waste cloth.

Damper Joint Assy

Damper

Mini memory PCB

34 print head cover

R.1.0

MAINTENANCE MANUAL > Disassemb ly and Reassembly > In k-related Parts > Head Unit

Model

TS34-1800A

Issued 2011.10.17 Revised

F/W ver

1.20

Remark

1.0

Rev.

Summary of Contents for TS34-1800A







































































































































































































































































Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands

MIMAKI TS34-1800A, Maintenance Manual

Search results

Summary of Contents for TS34-1800A

Reviews:

Related manuals for TS34-1800A

Brands by name

Popular brands