MIMAKI SWJ-320 S2, Maintenance Manual

Page: 159 / 210

© 2013 MIMAKI ENGINEERING CO.,LTD. 6.4.15 P.1
R.1.0
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Suction Fan Relay
Model SWJ-320S Issued 2012.07.19 Revised F/W ver Remark
1.0
Rev.
6.4.15 Suction Fan Relay
 Work procedures
1. Turn off the main power supply and remove the power plug
from the main body.
2. Open the left electrical BOX cover.
3. Pull out the relay to the front, and remove it from the relay
socket.
キ
4. Reverse the disassembly procedure for reassembly.
After turning off the sub and main power switches, unplug the power cord. Make sure to take 15
minutes before restarting the operation. It is very dangerous if sleep mode functions mistakenly
during the operation.
Additionally, if electric charges are still remaining, it may cause damage to electronic parts or the like.
Suction fan relay
Inside of Left electrical box
Suction fan relay
Narrower pitch
Wider pitch
Lever (yellow)
When the relay is mounted, turn the side of wider
pin-pitch to the lever (yellow) side, and insert it
not to bend the pins of backside of relay.