MIMAKI SWJ-320 S2, Maintenance Manual

Page: 80 / 210

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.14 P.3
4.2.14 INK PURGE
R.1.2
1
2
3
4
5
6
7
8
 Ink discharging at part replacement ( Liquid supply pump ON)
1. Disconnect the tube from the ink bottle.
2. Select [#ADJUST] -> [INK PURGE].
3. Press [ENTER] key to move the carriage to the maintenance
position.
4. Turn the ink pump ON.
[

] / [

] :Liquid supply pump ON/OFF selection
[ENTER] : End
5. Check the ink color, and press the purge button until no ink is
discharged from the head.
6. Manually perform wiping.
7. Press [ENTER] key to terminate [#INK PURGE].
 After parts replacement (Ink charging)
1. Check that the ink bottle has been set.
2. Select [#ADJUST] -> [INK PURGE].
3. Press [ENTER] key to move the carriage to the maintenance
position.
4. Turn the ink pump ON.
[

] / [

] :Liquid supply pump ON/OFF selection
[ENTER] : End
5. Insert the air purge jig into the ink port and insert another end of
the jig for discharge into the waste ink tank or tray, and press
the purge button.
Press the button continuous until ink is discharged flow from
end of the jig.
6. Manually perform wiping.
7. Press [ENTER] key to end.
FUNCTION
#ADJUST
[ENT]
#ADJUST
INK PURGE
[ENT]
INK PURGE
CARRIAGE OUT
[ENT]
INK PURGE (O
FF
)
COMPLETED [ENT]
INK PURGE (ON )
COMPLETED [ENT]
(Purge button enable)
Parts replacement
FUNCTION
#ADJUST
[ENT]
#ADJUST
INK PURGE
[ENT]
INK PURGE
CARRIAGE OUT
[ENT]
Purge button
INK PURGE (ON )
COMPLETED [ENT]
(Purge button enable)
 Remove the air purge jig quickly after
performing to purge, for prevention of air
countercurrent.
MAINTENANCE MANUAL > Adjustment > Adjustment Items > INK PURGE
Model SWJ-320S Issued 2012.07.19 Revised 2013.03.08 F/W ver 1.0 Remark
1.2
Rev.