MIMAKI SWJ-320 S2, Maintenance Manual

Page: 57 / 210

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.3 P.2
4.2.3 [HEAD ADJUST] Head tilting
R.1.0
1
2
3
4
5
6
7
8
8. Turn the tilt adjustment screw and adjust the tilt of the head.
9. Tighten the head fixing screw.
10. Put on the cap.
11. Print and verify the adjustment pattern.
In case of the head being out of the acceptable range, repeat the
above procedure 6 to 9 until the tilting is within the acceptable
range.
Head condi-
tion
Figure when viewed
with a scope
Adjustment method
(tilt adjustment
screw rotation
direction)
Not tilted
Tilted to
the right
Back side
Near side
Tilted to
the left
Back side
Near side
If the cap is kept off for a long time, it may result
in a skewed ink discharge trajectory or nozzle
misalignment. If skewed ink discharge trajectory
or nozzle misalignment occurs, the head cannot be
adjusted properly, so do not keep the cap off for a
long time.
In addition, if nozzle misalignment or skewed ink
discharge trajectory occurs, perform cleaning.
MAINTENANCE MANUAL > Adjustment > Adjustment Items > [HEAD ADJUST] Head tilting
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 2.20 Remark
1.0
Rev.