MIMAKI SWJ-320 S2 Page 164 Maintenance Manual Download

Page: 164 / 210

6.6.2

P.1

R.1.0

MAINTENANCE MANUAL > Disassemb ly and Reassembly > Pre ssurizing relations > Plural solenoid valve assy.

Model

SWJ-320S

Issued 2012.07.19 Revised

F/W ver

Remark

1.0

Rev.

6.6.2 Plural solenoid valve assy.



Work procedures

1. Turn off the main power supply and remove the power plug

from the main body.

2. Open the cover LR.

3. Remove the screw, and remove the BKT.

4. Disconnect the connection connectors.

5. Unscrew the screws on the upper surface of bracket, and

remove the solenoid valve assy.

6. Disconnect the air tubes (2 positions) arranged in the solenoid

valve assy.

7. Reverse the disassembly procedure for reassembly.

Plural solenoid valve assy.

Backside of machine

Air tank sensor assy.

Bracket

screw(x2)

Connector 1

Valve 1

In case of the replacement of plural solenoid valve
assy., make some marking to the connection con-
nectors and the air tubes, and connect them cor-
rectly.

screw(x2)

Summary of Contents for SWJ-320 S2



















































































































































































































Search results

Summary of Contents for SWJ-320 S2

Reviews:

Related manuals for SWJ-320 S2

Brands by name

Popular brands

MIMAKI SWJ-320 S2, Maintenance Manual

Search results

Summary of Contents for SWJ-320 S2

Reviews:

Related manuals for SWJ-320 S2

Brands by name

Popular brands