MIMAKI SWJ-320 S2, Maintenance Manual

Page: 184 / 210

© 2013 MIMAKI ENGINEERING CO.,LTD. 7.1.2 P.1
R.1.2
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Troubleshooting > Details on Errors and Malfunctions > List of Error Messages
Model SWJ-320S Issued 2012.07.19 Revised 2013.03.08 F/W ver 1.0 Remark
1.2
Rev.
7.1.2 List of Error Messages
 List of Error Messages ?1/5?
No. LCD Cause List of Countermeasures
1
ERROR 108
HD
CONNECT[12345678]
Head connection error
(Head connection can not be confirmed) 1. Check the setting of loading number of the head in the
parameter.
(System parameter No.41 HEAD NO=3)
2. Check connection between the HDC PCB from the Print
Head
3. Replace the HDC PCB with a new one. ( Refer to 6.4.7)
4. Replace the Print Head with a new one. ( Refer to 3.3.1)
2
ERROR 108
HD THERMIS[12345678]
Head thermistor
(Head temperature can not be measured)
3
ERROR 128
HDC FIFO OVER
HDC FIFO OVER error
(Data transmission speed is too fast Con-
trol PCB trouble)
HDC FIFO OVERRUN is detected at the
scan slider process (ScanSlider) 1. Check the parameter.
(Is the scan parameter the default value?)
2. Update F/W.
3. Check if there is no data error from RIP.
4. To make sure, repeat RIP.
5. Disconnect and connect the FFC located between the MAIN
PCB and the HDC PCB.
6. Replace the FFC and cable located between the MAIN PCB
and the HDC PCB.
7. Replace the HDC PCB with a new one. ( Refer to 6.4.7)
8. Replace the MAIN PCB with a new one. ( Refer to 3.3.1)
4
ERROR 128
HDC FIFO UNDER
HDC FIFO UNDER error
(Data transmission speed is too slow Con-
trol PCB trouble)
HDC FIFO UNDERRUN is detected at the
scan slider process (ScanSlider)
5
ERROR 129
BATTERY EXCHANGE
Battery dead (RTC battery dead is
detected.)
Proper information of Printer or Time
(Dedicated IC) unusable on Printer initial-
izing process (opinit). 1. Replace a battery equipped on the MAIN PCB with new one.
(CR2032)
*The new battery should be the same product or the
equivalent.
*Discard the old battery according to the instruction
from the maker.
6
ERROR 12a
HDC SPEED
Ink discharging trigger error
As intervals of ink discharging trigger are
too short, next discharging trigger occurs
before one wave shape is completed.
1. Perform the linear encoder test.
2. Replace the linear scale.
3. Replace the linear encoder sensor.
4. Replace the HDC PCB with a new one.
( Refer to 6.4.7)
5. Replace the MAIN PCB with a new one. ( Refer to 3.3.1)
7
ERROR 12e
HeadFaild /HDC[12__]
Printer head which is connected the HDC
PCB that displayed number on the LCD is
out of order. 1. Replace the cable between the HDC PCB from the Print
Head with a new one.
2. Replace the Print Head with a new one. ( Refer to 3.3.1)
3. Replace the HDC PCB with a new one. ( Refer to 6.4.7)
8
ERROR 130
HD DATA SEQ
Head data transferring sequence error 1. Disconnect and connect the FFC located between the HDC
PCB and the MAIN PCB.
2. Replace the FFC located between the HDC PCB and the
MAIN PCB.
3. Replace the HDC PCB with a new one. ( Refer to 6.4.7)
4. Replace the MAIN PCB with a new one. ( Refer to 3.3.1)