Miha bodytec m.ove Operating Instructions Manual Download Page 42

Page: 42 / 117

Electromagnetic compatibility

4.1 Compliance details

As noted in section 3, the miha bodytec m.ove EMS training device

complies with IEC 60601-1-2:2014 and IEC 60601-2-10:2012.

According to these standards, the requirements apply as listed in

the tables below.

Guidance and manufacturer’s declaration – electromagnetic emissions

The miha bodytec m.ove EMS training device has been designed for use in electromagnetic environments

as outlined below.

The buyer or user of the miha bodytec m.ove device must ensure that the device is operated under such

conditions.

Emission tests

Compatibility

Electromagnetic environment –

guidance

RF emissions

CISPR 11

Group 1

The miha bodytec m.ove EMS

training device uses low RF power

for internal operation. Generating

very low RF interference emis-

sions, it is not likely to interfere

with electronic equipment in its

vicinity.

RF emissions CISPR 11

Class B

The miha bodytec m.ove device is

suitable for usage in any building,

including residential buildings and

those connected up direct to low-

voltage power supply networks

installed for residential buildings.

Harmonic distortion.

IEC 61000-3-2

Class A

Voltage fluctuations and flicker.

IEC 61000-3-3

Complies

Guidance and manufacturer’s declaration - electromagnetic immunity

The miha bodytec m.ove EMS training device has been designed for use in electromagnetic environments

as outlined below.

The buyer or user of the miha bodytec m.ove device shall make sure that the device is used under such

conditions.

Immunity test

IEC-60601 test level

Compliance level

Electromagnetic envi-

ronment – instructions

Electrostatic discharge

(ESD)

IEC 61000-4-2

±8 kV on contact dis-

charge

±2 kV, ±4 kV, ±8 kV,

±15 kV air discharge

±8 kV contact discharge

±2 kV, ±4 kV, ±8 kV,

±15 kV air discharge

The miha bodytec m.ove

EMS training device can

be used in rooms without

humidity control. Floors

can be covered with syn-

thetic material. If so, the

relative humidity should

be at least 5 %.

Electromagnetic compatibility

2021-07-28

miha-bodytec m.ove EMS training device

Summary of Contents for bodytec m.ove






















































































































Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands

Miha bodytec m.ove, Operating Instructions Manual

Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands