It can only be used in networks with the designated and preconfig-
ured Wi-Fi access point, which is available upon request from miha
bodytec.
The device’s network capability is used for communicating with the
miha bodytec LOGX portal. The miha bodytec LOGX portal is a
control center for commercial use. It is provided by miha bodytec.
7.11 Resetting to factory settings
A security code can be used for resetting the device settings to the
state they were in when it was delivered. This process deletes cus-
tomized settings. If you wish to reset the device, contact Customer
Service (
“Customer service” on page 16).
7.12 Displaying statistics
1.
Open the
“Setup”
menu tab.
ð
The
“Setup”
menu tab opens.
2.
Use the multi-function button to select the
“Statistics
summary”
menu item and press the button to confirm your
selection.
ð
The
“Statistics summary”
menu opens.
You can view the following statistics in the
“Statistics summary”
menu:
n
Device runtime (operating hours counter)
n
Programs (total runtime divided across the programs)
n
Customers (total runtime divided across customer card num-
bers)
Example:
–
25:30 equals 25 hours and 30 minutes.
Statistics are displayed in hours and minutes.
miha bodytec LOGX portal
Customization and setup
2021-07-28
miha-bodytec m.ove EMS training device
71