Miha bodytec m.ove Operating Instructions Manual Download Page 79

Page: 79 / 117

Turn the i-body

strap flex so that the pushbutton faces out-

wards (Fig. 41).

10.

If the i-body

strap flex does not fit properly, select a different

loop to make it tighter or wider. If necessary, select a different
i-body

straps flex size.

11.

Put the i-body

strap flex on the right arm the same way as

on the left arm.

12.

Connect both i-body

straps flex to the i-body

(Fig. 42/1 and

2) to the i-body

cable.

When connecting the i-body

straps flex, always ensure

that the corresponding cables (medium length) are used, in

accordance with Fig. 42.

13.

Moisten 2 more i-body

straps flex (Fig. 43).

Fig. 41: Positioning the i-body

strap

flex

Fig. 42: Connecting the i-body

straps

flex

Putting on and closing the i-body

straps flex (legs)

Fig. 43: i-body

straps flex

Before the training

2021-07-28

miha-bodytec m.ove EMS training device

Summary of Contents for bodytec m.ove






















































































































Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands

Miha bodytec m.ove, Operating Instructions Manual

Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands