All controls with the exception of the on/off switch, which is located
on the underside (Fig. 3), are located on the top side of the control
unit.
The main controller (Fig. 2/14) enables the athlete to regulate
pulse strength of all outputs simultaneously. A connected pair of
electrodes is an output in this context.
The pulse strength of individual outputs can be regulated using the
relevant level controllers (Fig. 2/1 – 8). The image above each of
these rotary switches shows the relevant part of the body for which
the pulse strength is regulated. For example, using the level con-
troller for legs (Fig. 2/1), the pulse strength sent to the legs is regu-
lated using the i-body
®
straps flex.
The two level controllers without any assigned body parts (Fig. 2/9,
10) do not have any function.
If a transponder card is placed on the transponder card contact
surface (Fig. 2/12), the settings stored on this card can be edited or
loaded automatically (
Chapter 10.6 “Transponder system”
The multi-function button (Fig. 2/13) is used for navigating through
the menus and for activating programs. The multi-function button is
also used for starting and stopping workouts.
The LC display (Fig. 2/11) shows menus and provides status infor-
mation on the device. A virtual person – an avatar – is shown on
the LC display during training. The athlete can use the movements
of the avatar, in addition to the instructions of the trainer, as an ori-
entation.
Overview and scope of delivery
2021-07-28
miha-bodytec m.ove EMS training device
9
