Miha bodytec m.ove Operating Instructions Manual Download Page 59

Page: 59 / 117

Select the

“Main menu”

menu item.

The main menu is displayed.

Press the multi-function button.

The training session is cancelled or ended. The training

screen remains open.

Press the multi-function button again.

Without transponder card: The main menu is displayed.

With transponder card: Data is written on the card and

the programs or training plans saved on the card are dis-

played. The main menu is only displayed after the card

has been removed from the device.

6.4 Entering text

Fig. 29: Entering text

When creating customized settings or personal data, you have the

option to store information in text form (e.g., “Create customer

card”

“Name”).

Fig. 27: Main menu

During training

Fig. 28: Main menu

Understanding the device

2021-07-28

miha-bodytec m.ove EMS training device

Summary of Contents for bodytec m.ove






















































































































Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands

Miha bodytec m.ove, Operating Instructions Manual

Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands