Miha bodytec m.ove Operating Instructions Manual Download Page 73

Page: 73 / 117

8.3 Moistening and applying electrodes

Electrodes may only be moistened and applied by the trainer or

under their supervision.

Risk of injury in the event of incorrectly attached cables!
– Electrodes may only be moistened and applied by the

trainer or under their supervision.

Cables not attached to the correct electrodes present a risk.

Risk of injury if detaching or connecting electrode cables

during operation!
– Start by making sure that no training program is active

(

“Opening the main menu” on page 58), then connect or

detach the electrodes.

– Never detach electrode cables while training.
– Never connect electrode cables while training.

Detachment or connection of electrode cables can result in

injuries that depend on the settings, such as torn muscle

fibers or shoulder dislocations.

Risk of injury due to damaged cables!
– Check the cables and electrodes for damage before every

workout.

– Never use the device if cables or electrodes are damaged.

Training with damaged cables or damaged electrodes can lead

to injuries.

Risk of injury from wearing accessories that are too small or

too large!
– Select the i-body

in accordance with the instructions

“Choosing the correct i-body

size” on page 74.

– Select i-body

straps flex and i-body

belt in accordance

with the instructions

“Selecting the size of the i-body

straps flex” on page 74.

Wearing accessories that are too small or too large (i-body

i-body

straps flex, i-body

belt) can lead to contact injuries.

Moistening and applying the elec-

trodes

Incorrectly attached cables

WARNING

Changing attachment during opera-

tion

WARNING

Damages

WARNING

Unsuitable accessories

WARNING

Before the training

2021-07-28

miha-bodytec m.ove EMS training device

Summary of Contents for bodytec m.ove






















































































































Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands

Miha bodytec m.ove, Operating Instructions Manual

Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands