Page 48
Ethernet Interface
combiSENSOR 64x0
Operating Menu, Set Controller Parameter
Preliminary Notes to the Settings
You can program the combiSENSOR 64x0 at the same time in two different kinds:
- Using a web browser via the sensor web interface
- With ASCII command set and terminal program via Ethernet (Telnet)
Login, Changing User Level
Assigning passwords prevents unauthorized changes to controller settings. Password protection is not en-
abled as a factory setting. After the controller has been configured, you should enable password protection.
i
A firmware update will not change the custom password.
User can do the following:
User
Professional
Password required
no
yes
View settings
yes
yes
Change settings, change password
no
yes
Start measuring
yes
yes
Scale graphs
yes
yes
Fig. 20 Permissions within the user hierarchy
Submit
Login
Logged in as
Password
User
Enter the password into the
Pass-
word
box and click
Submit
to
confirm.
To change to user mode, click the
Logoff
button.
Fig. 21 Changing to professional level
