70 / 72
HBC-series V7 LV+MV
Indication module BL_04D
Extended cable EC_2 to ICS-2 connector
Power cables 10 mm
2
, 16 mm
2
, 25 mm
2
a 35 mm
2
with ring terminals
(screws, nuts and spacers include)
Service cable SCA_10L
(30 cm)
Cable for motor sensors,
EFRA compatible CMS_6
(20 cm)
Phoenix Contact connectors (opposition part) for HBC 25063, 40063, with 2, 3, 4, 6 and 7 pins
(when are used on the driving board B15)
. . . . .
Indication module BL_04D - detail
Super brightness LED
with wide viewing
angle
Extended cable EC_2 to ICS-2 connector
– „Y“ type
Accessories
The controllers can be directly connected LEDs drive (not included). Light up when you drop in traction voltage (or residual batter y capacity)
below the set limit.
For mounting fan(s) to original cooler (on the controller) is possible use only enclosed screws.
Use another type of fan or another screws for mounting to controller is strictly prohibited !
FAN 12-60 with screws
(to 18063-3 and 100120-3
HBC-series controller)
FAN 12-50 with screws
(to 25063-3 nad 140120-3
HBC-series controller)
Battery temperature sensor (BT)
