51 / 72
HBC-series V7 LV+MV
Locks of parameters
If you need for parameters that you set (only some or even all) the user could not change value for any reason, you can use a system of locks
parameters. If the window "
Settings
" click on "
Lock settings
", you open the window where you can choose which parameter remains open
and which not.
Mark all the parameters you want locked against overwriting
(here P1, P2, P3 and P4), enter "
Lock code
" and select
"
Write settings
"
“.
From this point are so selected parameters accessible (i.e. can
be change their value) only if the write correct code.
