Metrix DOX3104 User Manual Download Page 161

Page: 161 / 193

Functional Description

4-Channel SPO Digital Oscilloscopes

161

XI - Logic Analyzer « Digital » option (Contact us)

The

DOX-MSO3LA

option

(

including a « Digital Analysis » software and an eigth-channel

digital probe) transforms the DOX3000 into a

Mixed Signal Oscilloscope

(MSO) with “4

analog” and “8 digital” inputs.

To start up the « Logic Analyzer » option requires to:

1° Load the license code of the « DIGITAL » option

2° Plug the « DOX-MSO3LA» digital probe into the front panel connector of the
oscilloscope :

3° Connect the digital probe to the circuit under test:

Turn

off

the circuit under test

Connect the probe ground wire to the reference of the circuit under test

Connect the other probe inputs to the circuit under test

Turn

the circuit under test

4° Press the front panel «

Digital

» button to open the DIGITAL menu.

Summary of Contents for DOX3104


































































































































































































Search results

Summary of Contents for DOX3104

Reviews:

Metrix DOX3104, User Manual, Page: 161 / 193

Search results

Summary of Contents for DOX3104

Reviews: