MI 2892 Power Master
Introduction
9
Always short unused voltage inputs (L1, L2, L3, GND) with neutral (N) input to prevent
measurement errors and false event triggering due to noise coupling.
Do not remove microSD memory card while instrument is recording or reading data. Record
damage and card failure can occur.
1.3
Applicable standards
The Power Master are designed and tested in accordance with the following standards:
Electromagnetic compatibility(EMC)
EN 61326-2-2: 2013
Electrical equipment for measurement, control and
laboratory use
–
EMC requirements
–
Part 2-2: Particular requirements - Test configurations,
operational conditions and performance criteria for
portable test, measuring and monitoring equipment used
in low-voltage distribution systems
Emission: Class A equipment (for industrial
purposes)
Immunity for equipment intended for use in
industrial locations
Safety (LVD)
EN 61010-1: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 1: General requirements
EN 61010-2-030: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 2-030: Particular requirements for testing and
measuring circuits
EN 61010-031: 2002 + A1: 2008
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
EN 61010-2-032: 2012
Safety requirements for electrical equipment for
measurement, control and laboratory use
Part 031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
Measurement methods
IEC 61000-4-30: 2015 Class A
Part 4-30: Testing and measurement techniques – Power
quality measurement methods
IEC 61557-12: 2007
Equipment for testing, measuring or monitoring of
protective measures – Part 12: Performance measuring
and monitoring devices (PMD)
IEC 61000-4-7: 2002 + A1: 2008
Part 4-7: Testing and measurement techniques –General
guide on harmonics and interharmonics measurements
and instrumentation for power supply systems and
equipment connected thereto
IEC 61000-4-15 : 2010
Part 4-15: Testing and measurement techniques –
Flickermeter – Functional and design specifications
