MI 2892 Power Master
Operating the instrument
102
Figure 3.72: Communication setup screen
Table 3.100: Description of Communication setup options
PC connection
Select USB or INTERNET, INTERNET (3G / GPRS), INTRANET (LAN)
communication port.
Com Port (PS/2)
Select GPS or MI 3108 / MI 3109 communication. GPS is used for A
1355 GPS receiver, and MI 3108 / MI 3109 for photovoltaics inverter
measurements (See MI 3108/ MI 3109 User manual).
Modem used in A 1565
Select this option if A 1475 WiFi / 3G modem modem is used within
A 1565 Waterproof case for outdoor application and recordings
DHCP
Select Enabled in order to enable automatic network parameters
assignment. Select Disabled in order to enter them manually.
Secret key
Valid only if INTERNET communication is selected. Secret number
will assure additional protection of communication link. Same
number should be entered in PowerView v3.0, before connection
establishment.
MAC address
Instrument Ethernet MAC address.
Instrument host name
Instrument host name.
Instrument IP address
Instrument IP address.
Note: For more information regarding configuration, how to download data, view real time measuring
data on PowerView and establish Remote instrument connection with PowerView over internet and USB
communication interfaces, see section 4.3 and PowerView Instruction manual.
Table 3.101: Keys in Communication setup
Changes communication source: USB, INTERNET, INTERNET (3G,GPRS)
Moves cursor position during entering Secret key.
Cursor keys. Selects parameter.
Changes Secret key number.
