MI 2892 Power Master
Operating the instrument
95
Table 3.87: Keys in Connection setup menu
Selects Connection setup parameter to be modified.
Changes selected parameter value.
Enters into submenu.
Confirms Factory reset.
Depends from Connection check status.
For:
OK sign ( ,
) Returns to the “MEASUREMENT SETUP” submenu.
Fail sign ( ) enter into “CONNECTION CHECK” submenu. It is expected
that user will resolve this issue before continuing with measurements.
Press
again in order to leave “CONNECTION CHECK” menu.
3.21.2
Event setup
In this menu user can setup voltage events and their parameters. See 5.1.12 for further details regarding
measurement methods. Captured events can be observed through EVENTS TABLE screen. See 3.17 and
5.1.12 for details.
Figure 3.66: Event setup screen
Table 3.88: Description of Event setup
Nominal voltage
Indication of type (L-N or L-L) and value of nominal voltage.
Swell Threshold
Set swell threshold value in % of nominal voltage.
Swell Hysteresis
Set swell hysteresis value in % of nominal voltage.
Dip Threshold
Set dip threshold value in % of nominal voltage.
Dip Hysteresis
Set dip hysteresis value in in % of nominal voltage.
Interrupt Threshold
Set interrupt threshold value in % of nominal voltage.
Interrupt Hysteresis
Set interrupt hysteresis in % of nominal voltage.
Table 3.89: Keys in Event setup screen
HELP
Shows help screens for Dip, Swell and Interrupt. See 5.1.13 for
details.
ENTER
F2
