MI 2892 Power Master
Operating the instrument
24
3.1
Instrument status bar
Instruments status bar is placed on the top of the screen. It indicates different instrument states. Icon
descriptions are shown on table below.
Status bar
Figure 3.3: Instrument status bar
Table 3.1: Instrument status bar description
Indicates battery charge level.
Indicates that charger is connected to the instrument. Batteries will be charged
automatically when charger is present.
Instrument is locked (see section 3.22.6 for details).
AD converter over range. Selected Nominal voltage or current clamps range is too
small.
09:19
Current time.
GPS module status (Optional accessory A 1355):
GPS module detected but reporting invalid time and position data.
(Searching for satellites or too weak satellite signal).
GPS time valid – valid satellite GPS time signal.
Instrument act as host USB, and is ready to accept USB memory stick.
One of the current clamps has opposite direction from the expected.
Internet connection status (see section 4.3 for details):
Internet connection is not available.
Instrument is connected to the internet and ready for communication.
Instrument is connected to the PowerView.
Recorder status:
General recorder is active, waiting for trigger.
General recorder is active, recording in progress.
Waveform recorder is active, waiting for trigger.
Waveform recorder is active, recording in progress.
Transient recorder is active, waiting for trigger.
Transient recorder is active, recording in progress.
