MI 2892 Power Master
Recording Practice and Instrument Connection
130
6.
Press “On line” key in order to set Dip SW-1, SW No. 2 (ON) according to the table below.
7.
Continue procedure according to the table below.
8.
After Dip SW-1, SW No. 8 is set, press Continue – “On line” key.
9.
Continue procedure according to the table below: Dip SW-2 and Dip SW-3.
10.
After Dip SW-3 No. 8 is set, press Write – “Feed” key for saving new configuration into memory.
11.
Turn Off/On printer.
Table 4.6: DPU 414
Dip switches settings are shown on table below:
SW
No.
Dip SW-1
Dip SW-2:
Dip SW-3
1.
OFF
Input = Serial
ON
Printing Colums = 40
ON
Data Length = 8 bits
2.
ON
Printing Speed =
High
ON
User Font Back-up = ON
ON
Parity setting = No
3.
ON
Auto Loading = ON
ON
Character Sel. = Normal
ON
Parity condition = Odd
4.
OFF
Auto LF = OFF
ON
Zero = Normal
OFF
Busy Control =
XON/XOFF
5.
OFF
Setting Cmd. =
Disable
ON
International
OFF
Baud Rate Select =
19200 bps
6.
OFF
Printing Density =
100%
ON
Character Set U.S.A.
ON
7.
ON
ON
ON
8.
ON
OFF
OFF
Note: Use “On Line” key as “OFF” and “Feed” key as “ON”.
4.3
Remote instrument connection (over Internet / 3G,GPRS)
4.3.1
Communication principle
Power Master instrument use Ethernet for connection to PowerView through internet. As companies
frequently use firewalls to limit internet traffic options, whole communication is routed through
dedicated “Metrel Route Server”. In this way instrument and PowerView can avoid firewalls and router
restrictions. Communication is established in four steps:
1.
User selects INTERNET connection under COMMUNICATION menu, and checks if connection to
Metrel server can be established (Status bar icon
should appear within 2 minutes).
Note: Outgoing ports 80, 443, 7781 ÷ 8888 to the gprs.metrel.si server should be opened on
remote firewall where instrument is placed!
2.
User enters instrument serial number on PowerView and connects to the instrument over
Metrel server.
Note: In case of using accessory A 1474 3G Wi-Fi modem for internet connection, please check A
1474 instruction manual in order to properly set up modem, before using it.
