MI 3325 MultiServicerXD
8
1 General description
1.1
Warnings and notes
Read before use
1.1.1 Safety warnings
In order to reach high level of operator safety while carrying out various measurements using
the MultiServicerXD instrument, as well as to keep the test equipment undamaged, it is
necessary to consider the following general warnings:
Read this Instruction manual carefully, otherwise use of the instrument may be
dangerous for the operator, for the instrument or for the equipment under test!
Consider warning markings on the instrument!
If the test equipment is used in manner not specified in this Instruction manual the
protection provided by the equipment may be impaired!
Do not use the instrument and accessories if any damage is noticed!
Regularly check the instrument and accessories for correct functioning to avoid
hazard that could occur from misleading results!
Consider all generally known precautions in order to avoid risk of electric shock
while dealing with hazardous voltages!
All normal safety precautions have to be taken in order to avoid risk of electric
shock when working on electrical installations!
Use only standard or optional test accessories
declared for this instrument and
supplied by your distributor!
Only test equipment provided or approved by Metrel should be connected to test
and communication connectors.
Only correctly earthed mains socket outlets shall be used to supply the
instrument!
In case a fuse has blown refer to chapter
to replace it!
Instrument servicing and calibration is allowed to be carried out only by a
competent authorized person!
Do not connect external voltage to CLAMP inputs. It is intended only for
connection of Clamps approved by Metrel.
LCD screenshots in this document are informative only. Screens on the
instrument may be slightly different.
