METREL MultiServicerXD MI 3325, Instruction Manual

Page: 192 / 209

MI 3325 MultiServicerXD Appendix C
191
Appendix C Print labels and write / read
RFID/NFC tags
The instrument supports different printers, label size forms and two tag formats (PAT and
Generic); listed parameters setting is described in chapter
4.9 Devices . By setting the printer,
label size forms and tag formats are limited.
Tag content can be presented as text only or arranged as text area and machine-readable code
area
– barcode or QR code – in addition.
The instrument supports RFID / NFC reader / writer device; tag type supported is NTAG216.
Please check with Metrel or distributor which printers and labels are supported in your
MultiServicerXD instrument.
C.1
PAT tag format
It is intended for tagging of individual appliance with Auto Sequence
® test data. To start
printing, Auto Sequence
® should be finished and saved or reopened from memory structure.
When required, printing of two labels of the same test can be set.
Available tag data presented in text area are:

Auto Sequence
® short Test code

Appliance ID

Appliance name

Test date

Retest date

Auto Sequence
® test status

User name (who currently performed test or who performed saved test, if printed from
memory)
Available tag data presented in machine-readable area are:

Auto Sequence
® short Test code

Appliance ID

Appliance name

Test date

Test period (from appliance description)

Appliance location (from appliance description)

Auto Sequence
® test status

User name (who currently performed test or who performed saved test, if printed from
memory)

Auto Sequence
® measurements results
Actual tag content depends on label type selection, when printing. Content of 1
st
and 2
nd
label is
also adopted, when 2-label printing is selected.
Following tables describe tag content arrangement and its data for supported form sizes and
chosen label type.