MI 2883 Energy Master
Operating the instrument
23
3.1 Instrument status bar
Instruments status bar is placed on the top of the screen. It indicates different
instrument states. Icon descriptions are shown on table below.
Status bar
Figure 3.3: Instrument status bar
Table 3.1: Instrument status bar description
Indicates battery charge level.
Indicates that charger is connected to the instrument. Batteries will be
charged automatically when charger is present.
Instrument is locked (see section 3.20.5 for details).
AD converter over range. Selected Nominal voltage or current clamps
range is too small.
09:19
Current time.
Recorder status:
General recorder is active, waiting for trigger.
General recorder is active, recording in progress.
Memory list recall. Shown screen is recalled from instrument memory.
Flagged data mark. While observing recorded data this mark will
indicate that observed measurement results for given time interval can
be compromised due to interrupt, dip or swells occurrence. See section
5.1.16 for further explanation.
Signalling voltage is present on voltage line at monitored frequencies.
See sections 3.13 and 3.19.4 for further explanation.
USB stick communication mode. In this mode selected record can be
transferred from microSD card to USB stick. USB communication with
PC is disabled while in this mode. See section 3.18 for details.
3.2 Instrument keys
Instrument keyboard is divided into four subgroups:
Function keys
Shortcut keys
Menu/zoom manipulation keys: Cursors, Enter, Escape
