MI 2883 Energy Master
Operating the instrument
24
Other keys: Light and Power on/off keys
Function keys
are multifunctional. Their current
function is shown at the bottom of the screen and depends on selected instrument
function.
Shortcut keys are shown in table below. They provide quick access to the most
common instrument functions.
Table 3.2: Shortcut Keys and other Function keys
UIf
Shows UIF Meter screen from MEASUREMENT submenu
PQS
Shows Power meter screen from MEASUREMENT submenu
Shows Harmonics meter screen from MEASUREMENT submenu
Shows Connection Setup screen from MEASUREMENT SETUP
submenu
Shows Phase diagram screen from MEASUREMENT submenu
Hold
key for 2 seconds to trigger WAVEFORM SNAPSHOT.
Instrument will record all measured parameters into file, which can be
then analysed by PowerView.
Set backlight intensity (high/low/off).
Hold
key for 2 s to disable/enable beeper sound signals.
Switch On/off the instrument.
Note: instrument will not power off if any recorder is active.
Note: Hold key for 5 seconds in order to reset instrument, in case of
failure.
Cursor, Enter and Escape keys are used for moving through instrument menu structure,
entering various parameters. Additionally, cursor keys are used for zooming graphs and
moving graph cursors.
3.3 Instrument memory (microSD card)
Energy Master use microSD card for storing records. Prior instrument use, microSD
card should be formatted to a single partition FAT32 file system and inserted into the
instrument, as shown on figure below.
F1
F2
F3
F4
