58
Programming—IFC-1010/2020 Programming
Prog
^
6
????
Level 2 Password
sec16a.cdr
Figure 47: Key Sequence to Access Option 6
(Change Passwords)
Option 6 from the Programming menu allows the programmer to change
the Level One and Level Two passwords for the IFC-1010/2020.
Notes:
•
The IFC-1010/2020s are shipped with initial Level One and Level Two
passwords of 00000. As a security measure, the control panel does not
echo password digits to the DIA and CRT screen. Rather, it displays an
asterisk (*) for each digit entered. After entering five password digits,
pressing Enter (on the DIA) or Return (on the CRT) places the new
password into operation.
•
Acceptable characters for a password are the digits 0-9.
PRESS 1=PSYS,2=FSYS,3=PPRG,4=FPRG,5=REMV,6=PSWD,7=MSG,8=HIS : 6
PRESS 1=LEVEL ONE,2=LEVEL TWO : 2
ENTER LEVEL TWO PASSWORD: *****
If a Level One or Level Two password is incorrectly entered, the panel
responds by displaying a special code word and prompts the programmer
to reenter the password. If the password has been forgotten, record this
code word and contact Johnson Controls Field Support Services through
the local Johnson Controls office. After proper authentication, the original
password can be determined from deciphering the code word. An example
of this code word follows:
ENTER LEVEL ONE PASSWORD: *****
INVALID PASSWORD: 7129406 REENTER PASSWORD:
Password
6=PSWD
Forgotten
Password
