Mercedes-Benz EQV 2021, Owner'S Manual

Page: 213 / 300

#
Pull the loose end of tensioning straps 3
down in the direction of the arrow until ten-
sioning straps
3
are tight.
#
Fold tensioning element 2 down to achieve
the final tension on the straps.
#
If necessary, fit the luggage compartment par-
tition (
/
page 211).
#
After travelling a short distance, check that the
load protection net is taut, and retighten it if
necessary.
Removing
#
Remove the luggage compartment partition if
necessary (
/
page 211).
#
Fold tensioning element 2 up.
Tensioning straps 3 are slack.
#
Unclip hooks 4 of tensioning straps 3 from
tie-down eyes 5 at the bottom.
#
Unclip the load protection net from upper
retainers
1
.
#
When required, remove tie-down eyes 5
( / page 209).
#
If necessary, fit the luggage compartment par-
tition ( / page 211).
#
Roll up the load protection net and fasten it,
still rolled up, using the Velcro fasteners.
Adjusting the front seat with the load protection
net fitted
#
Fold tensioning element 2 on straps 3
upwards.
The load protection net slackens.
#
Correctly adjust the front seat.
#
Re-tension the load protection net.
Using the luggage compartment partition
&
WARNING Risk of injury from unsecured
objects in the vehicle
When objects are unsecured or inadequately
secured, they can slip, tip over or be thrown
about, striking vehicle occupants.
This also applies to:
R
luggage or loads
R
seats which have been removed and are
being transported in the vehicle in an
exceptional case
There is a risk of injury, particularly in the
event of braking manoeuvres or abrupt
changes in direction.
#
Always stow objects in such a way that
they cannot be tossed about.
#
Before travelling, secure objects, luggage
or load to prevent them slipping or tip-
ping over.
#
When a seat is removed, keep it prefera-
bly outside the vehicle.
&
WARNING Risk of accident or injury when
the luggage compartment partition is not
locked in position
The luggage compartment partition can come
loose when driving and be thrown about the
vehicle interior.
#
Fit the luggage compartment partition as
described.
#
After fitting the luggage compartment
partition, always make sure that the lug-
gage compartment partition is locked
and folded down.
* NOTE Damage to the luggage compart-
ment partition due to heavy loads
If the luggage compartment partition is loaded
with too much weight, the fixture points and
the luggage compartment partition may be
damaged.
#
Do not load more than 50 kg on the lug-
gage compartment partition.
The luggage compartment partition is only secured
correctly when both levers are locked.
#
Comply with the loading guidelines
(
/
page 206).
Transporting 211
T447 0414 02