#
To remove: fold up bed extension
3
and
unscrew thumbscrews
4
.
The bed extension will now be loose and capa-
ble of being removed from the guide rails.
#
To install: guide bed extension
3
into the
guide rails and tighten thumbscrews
4
.
Setting up the berth
&
WARNING Risk of injury or death if the
berth is used while the vehicle is in motion
Any vehicle occupant using a bed while the
vehicle is in motion cannot be restrained prop-
erly.
#
Use the bed only when the vehicle is
parked.
&
WARNING Risk of becoming trapped when
the seat backrest is folded up and down
When folding the seat backrest up or down,
you could cause yourself or other vehicle occu-
pants to become trapped.
#
Make sure that the range of movement of
the seat backrest is clear and that no
one is trapped.
The safety net for the top berth is not a restraint
system for vehicle occupants while the vehicle is in
motion.
The berth can accommodate two persons.
#
Fold up the short section of bed extension
6
.
#
Move the seat/bunk combination forwards to
mark
7
on the guide rail.
#
Remove the head restraints of the seat/bunk
combination.
#
Rotate the head restraints by 180° and insert
them into brackets
5
on the rear side of the
seat backrest.
#
Pull backrest release handle
8
up and adjust
the seat backrest to a horizontal position.
When doing so, hold on to the seat backrest
only by the grab strap.
#
Fold down the short section of the bed exten-
sion
6
.
Folding away the berth
#
Perform the steps to set up the berth in
reverse order.
90
Seats and stowage
T447 0414 02
Summary of Contents for EQV 2021
Page 1: ...EQV Owner s Manual T447 0414 02 ...
Page 7: ...T447 0414 02 ...
