Mercedes-Benz EQV 2021 Owner'S Manual Download Page 64

Page: 64 / 300

Press button

on the handle on the rear win-

dow.

Closing

Swing the rear window down and push it

closed.

▌

Programming the key button for the tailgate or

rear window

Requirements:

The tailgate and the rear window are closed.

The vehicle is switched on.

If your vehicle is fitted with an EASY-PACK tailgate,

you can program the

button on the key

either to open/close the tailgate or to open the

rear window.

Press the buttons in the handle of the tailgate

and in the handle of the rear window simulta-

neously for approximately five seconds.

After successfully changing the function, the

vehicle turn signal lamps flash once.

Check the function of the

button on the

key.

Side window

Opening and closing the side windows

WARNING Risk of becoming trapped when

opening a side window

When you open a side window, parts of the

body could be drawn in or become trapped

between the side window and window frame.

When opening, make sure that nobody is

touching the side window.

If someone is trapped, release the button

immediately or pull it in order to close

the side window again.

WARNING Risk of becoming trapped when

closing a side window

When closing a side window, body parts could

be trapped in the closing area in the process.

When closing, make sure that no body

parts are in the closing area.

If someone is trapped, release the button

immediately or press the button in order

to reopen the side window.

WARNING Risk of becoming trapped when

children operate the side windows

Children could become trapped if they operate

the side windows, particularly when unatten-

ded.

Activate the child safety lock for the rear

side windows.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Never leave children unattended in the

vehicle.

WARNING Risk of fatal injury due to expo-

sure to extreme heat or cold in the vehicle

If persons, particularly children, are subjected

to prolonged exposure to intense heat or cold,

there is a risk of severe injury or even death.

Never leave persons, particularly chil-

dren, unattended in the vehicle.

To open manually: press and hold button

To close manually: pull and hold button

The windows in the front doors can also be oper-

ated automatically.

To open completely: briefly press button

beyond the point of resistance.

Automatic operation will start.

To close completely: briefly pull button

beyond the point of resistance.

Automatic operation will start.

To interrupt automatic operation: briefly press

or pull button

again.

Opening and closing

T447 0414 02

Summary of Contents for EQV 2021













































































































































































































































































































Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands

Mercedes-Benz EQV 2021, Owner'S Manual

Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands