#
Pull the release handle for front seat legs
2
up.
#
Hold the seat/bunk combination by the lower
edge of the seat cushion.
#
Fold the seat/bunk combination forwards and
lift it out of seat anchorages
3
.
Installing the seat/bunk combination
A seat/bunk combination may not be fitted in the
face-to-face position.
#
Hold the seat/bunk combination by the lower
edge of the seat cushion.
#
Place the seat/bunk combination into front
seat anchorages
3
from above at the front
and engage it.
#
Make sure that release handles for front seat
legs
2
are folded down in the direction of the
floor of the vehicle.
#
Fold the seat/bunk combination back into the
seat position.
#
Press the release handle for rear seat anchor-
age
1
downwards until indicator tabs
4
have fully retracted into the rear seat legs.
The rear seat legs of the seat/bunk combination
are correctly engaged when the seat legs engage
audibly and indicator tabs
4
on the seat legs are
no longer visible and have fully retracted into the
seat legs.
Head restraints
▌
Adjusting the head restraint mechanically
&
WARNING Risk of injury due to adjusting
vehicle settings while the vehicle is in
motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
R
If you adjust the driver's seat, the head
restraints, the steering wheel or the mirror
while the vehicle is in motion.
R
If you fasten your seat belt while the vehi-
cle is in motion.
#
Before starting the drive system: adjust
the driver's seat, the head restraints, the
steering wheel and the mirror and fasten
your seat belt.
&
WARNING Risk of injury due to head
restraints not being fitted or being adjus-
ted incorrectly
If head restraints have not been installed or
have not been adjusted correctly, there is an
increased risk of injury in the head and neck
area, e.g. in the event of an accident or when
braking.
#
Always drive with the head restraints fit-
ted.
#
Before driving off, make sure for every
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the front
and rear seats. Otherwise, you will not be able to
set the height and inclination of the head restraints
to the correct position.
Using the head restraint fore-and-aft adjustment,
adjust the head restraint so that it is as close to
the back of the head as possible.
92
Seats and stowage
T447 0414 02
Summary of Contents for EQV 2021
Page 1: ...EQV Owner s Manual T447 0414 02 ...
Page 7: ...T447 0414 02 ...
