Fitting/removing the cover in the front wheel arch
#
To remove: grip the centre of cover
1
, slide it
upwards and pull it out.
The cover will hang downwards on the strap.
#
To fit: insert cover
1
at the top and slide it
downwards until it engages.
Low beam
#
Remove the cover in the front wheel arch.
#
Turn housing cover
1
anti-clockwise and
remove it.
#
Turn socket
2
for low beam to the left and
pull it out.
#
Pull the bulb out of socket
2
.
#
Insert the new bulb into socket
2
.
#
Insert socket
2
and rotate it to the right to
tighten it.
#
Press on housing cover
1
and rotate it to the
right to tighten it.
#
Replace the cover in the front wheel arch.
High beam, standing/parking lights and daytime
running lights
#
Open the bonnet.
#
Turn housing cover
1
anti-clockwise and
remove it.
#
Pull out the bulb with socket
2
.
#
Insert the new bulb with socket
2
and engage
it as far as it will go.
#
Press on housing cover
1
and rotate it to the
right to tighten it.
#
Close the bonnet.
Turn signal light
#
Open the bonnet.
#
Turn socket
1
anti-clockwise and pull it out.
#
Pull the bulb out of socket
1
.
#
Insert the new bulb into socket
1
.
#
Insert socket
1
and turn it clockwise until it
engages.
#
Close the bonnet.
Light and vision 111
T447 0414 02
Summary of Contents for EQV 2021
Page 1: ...EQV Owner s Manual T447 0414 02 ...
Page 7: ...T447 0414 02 ...
