#
When you rotate the seats, make sure
there is sufficient clearance.
You can rotate the driver's and front passenger
seats by 50° and 180°. The seats engage both in
and opposite to the direction of travel as well as at
50° towards the exit.
#
When you rotate the seat, open the respective
front door in order to avoid a collision with the
door trim.
#
Adjust the steering wheel in such a way that
there is sufficient clearance to rotate and
adjust the driver's seat (
/
page 95).
#
Push lever
1
in the direction of the arrow.
The turning device will be unlocked.
#
Rotate the seat in the desired direction.
#
If there is a risk of collision with the centre
console or the B‑pillar, pull lever
2
upwards
and move the front seat forwards or back-
wards into the desired position. Then release
lever
2
.
#
In the desired position, make sure that the seat
has engaged in the direction of rotation and
the longitudinal direction.
Adjusting armrests
#
Fold the armrest upwards more than 45° in
position
2
.
The armrest will be unlocked.
#
Fold the armrest forwards
3
as far as it will
go.
#
Slowly fold the armrest upwards into the
required position.
#
To fold the armrest upwards: if necessary, fold
the armrest upwards more than 90° in position
1
.
Rear seats and rear bench seat
▌
Notes on the rear seats
Your vehicle may be equipped with the following
seats and bench seats in the rear compartment:
R
Standard rear seat
R
Luxury rear seat
R
Comfort rear bench seat
R
Seat/bunk combination
Bench seat anchorage
&
WARNING Risk of accident‑ and injury if
the seat is not engaged
If a seat is not engaged, it may be thrown
about while the vehicle is moving.
#
Always make sure that all seats are
engaged as described.
&
WARNING Risk of accident and injury as a
result of rear bench seat not being
engaged
If the rear bench seat is not engaged, it may be
flung around during travel.
#
Always make sure that the rear bench
seat is engaged as described.
Keep the seat anchorages in the vehicle floor free
of dirt and objects at all times to ensure that the
seat engages securely.
If the indicator tab of the seat anchorages is not
retracted into the seat leg, the seat is not correctly
engaged. Engage the seat again.
Example: seat rail system with quick-locking mech-
anism
Seats and stowage
75
T447 0414 02
Summary of Contents for EQV 2021
Page 1: ...EQV Owner s Manual T447 0414 02 ...
Page 7: ...T447 0414 02 ...