Bulb mount
3
Turn signal light
4
Brake light, tail light, parking light
5
Reversing light
6
Rear fog light (only on the driver's side)
#
Remove the tail lamp.
#
Gently turn the bulb anti-clockwise and take it
out of the socket.
#
Push the new bulb into the socket and turn it
clockwise to screw it in.
#
Insert bulb mount
2
into the tail lamp and
tighten all three screws
1
.
#
Install the tail lamp.
LED tail lamp
#
Remove the tail lamp.
#
Unscrew housing cover
1
by turning it anti-
clockwise.
#
Turn the socket anti-clockwise and pull it out.
#
Pull the bulb out of the socket.
#
Insert the new bulb into the socket.
#
Insert the socket and rotate it clockwise to
tighten it.
#
Press on housing cover
1
and rotate it clock-
wise to tighten it.
#
Install the tail lamp.
Replacing interior light bulbs
▌
Replacing light sources in the interior
Requirements:
R
The interior lighting has been switched off.
R
Rear and load compartment lamp: you require
a T10 6W xenon light source.
R
Interior and surround lighting: you require a
W 5 W light source.
R
Signal and ambient lamp in the tailgate: you
require a W 5 W light source.
Rear and load compartment lamps
#
Push in the catch spring of lens
1
with a suit-
able object, e.g. a screwdriver, and then prise
off the lens with the lamp housing.
#
Push the lugs of socket
2
inwards.
#
Remove light source
3
from the lamp hous-
ing.
#
Insert the new light source.
#
Position the lens on the lamp housing and
engage it.
#
Align the lens with the lamp housing and
engage it.
Additional interior and surround lighting
Depending on the equipment, replacing the light
sources as described here applies to the following
lamps:
R
The sun visor mirror lamp
R
The ambient lamp at the bottom of the front
door
R
The ambient lamp on the inside of the tailgate
Light and vision 113
T447 0414 02
Summary of Contents for EQV 2021
Page 1: ...EQV Owner s Manual T447 0414 02 ...
Page 7: ...T447 0414 02 ...
