Mercedes-Benz EQV 2021 Owner'S Manual Download Page 72

Page: 72 / 300

Notes on the correct driver's seat position

WARNING Risk of injury due to adjusting

vehicle settings while the vehicle is in

motion

You could lose control of the vehicle in the fol-
lowing situations in particular:

If you adjust the driver's seat, the head

restraints, the steering wheel or the mirror

while the vehicle is in motion.

If you fasten your seat belt while the vehi-

cle is in motion.

Before starting the drive system: adjust

the driver's seat, the head restraints, the

steering wheel and the mirror and fasten

your seat belt.

Ensure the following when adjusting steering wheel

, seat belt

and driver's seat

You are sitting as far away from the driver's air-

bag as possible.

You are sitting in an upright position.

Your thighs are gently supported by the seat

cushion.

Your legs are not fully extended and you can

reach the pedals easily.

The back of your head is supported at eye level

by the middle part of the head restraint.

You can hold the steering wheel with your arms

slightly bent.

You can move your legs without any restric-

tions.

You can see all of the instrument cluster dis-

plays well.

You have a good overview of the traffic condi-

tions.

Your seat belt sits snugly against your body

and passes across the centre of your shoulder

and across your hips in the pelvic area.

Seats

Adjusting the front seat mechanically

WARNING Risk of becoming trapped if the

seats are adjusted by children

Children could become trapped if they adjust

the seats, particularly when unattended.

When leaving the vehicle, always take the

key with you and lock the vehicle.

Never leave children unattended in the

vehicle.

WARNING Risk of injury due to adjusting

vehicle settings while the vehicle is in

motion

You could lose control of the vehicle in the fol-
lowing situations in particular:

If you adjust the driver's seat, the head

restraints, the steering wheel or the mirror

while the vehicle is in motion.

If you fasten your seat belt while the vehi-

cle is in motion.

Before starting the drive system: adjust

the driver's seat, the head restraints, the

steering wheel and the mirror and fasten

your seat belt.

WARNING Risk of becoming trapped dur-

ing seat adjustment

When you adjust a seat, you or other vehicle

occupants could become trapped, e.g. on the

seat guide rail.

Make sure when adjusting a seat that no

one has any body parts in the sweep of

the seat.

Observe the safety notes on "Airbags" and "Chil-

dren in the vehicle".

WARNING Risk of accident due to the driv-

er's seat not being engaged

The driver's seat may move unexpectedly while

driving.

Seats and stowage

T447 0414 02

Summary of Contents for EQV 2021













































































































































































































































































































Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands

Mercedes-Benz EQV 2021, Owner'S Manual

Search results

Summary of Contents for EQV 2021

Reviews:

Related manuals for EQV 2021

Brands by name

Popular brands