Mercedes-Benz EQV 2021, Owner'S Manual

Page: 193 / 300

Information on important system updates
Important system updates may be necessary for
the security of your multimedia system's data.
Install these updates, or else the security of your
multimedia system cannot be ensured.
A system update consists of three steps:
R
Downloading or copying of the data required
for installation
R
Installation of the downloaded system update
R
Activating the downloaded system update by
restarting the system
%
An Internet connection is required for online
updates. For automatic online updates, your
vehicle must have a permanently installed
communication module.
%
You can start the software update manually via
the system settings. If automatic software
updates are activated, the system updates will
be downloaded automatically . Settings for
automatic software updates can also be made
in the system settings.
The multimedia system provides a corresponding
message when a system update is available.
You have the following selection options:
R
Download
The system update will be downloaded in the
background.
R
Details
Information about the pending system update
is displayed.
R
Later
The system update can be downloaded man-
ually at a later time.
Deep system updates
Deep system updates access vehicle or system
settings and can therefore only be carried out
when the vehicle is stationary and the vehicle is
switched off.
When the download of a deep system update is
complete and the downloaded system update is
ready for installation, you will be notified, for exam-
ple, after the vehicle is switched on again.
%
Park the vehicle safely in a suitable location
before starting the installation.
Requirements for the installation:
R
The vehicle is switched off.
R
Notes and warnings have been read and
accepted.
R
The electric parking brake has been applied.
If all requirements are met, the downloaded sys-
tem update is installed. The multimedia system
cannot be operated while the downloaded system
update is being installed and vehicle functions are
restricted.
If errors should occur during the installation, the
multimedia system automatically attempts to
restore the previous version. If restoration of the
previous version is not possible, a symbol appears
on the media display. Consult a qualified specialist
workshop to resolve the problem.
Setting up a Wi-Fi hotspot
Requirements:
R
To set up the Wi-Fi connection of the multime-
dia system with external hotspots: there is no
communication module installed.
R
The device to be connected supports at least
one of the types of connection described.
Multimedia system:
4
©
5
Settings
5
System
5
Wi-Fi & Bluetooth
Activating/deactivating Wi-Fi
#
Select Wi-Fi .
Connecting the multimedia system to an external
hotspot via Wi-Fi
%
The connection procedure may differ depend-
ing on the device. Follow the instructions that
are shown in the display. Further information
can be found in the manufacturer's operating
instructions.
#
Select Internet settings .
#
Select Connect via Wi-Fi .
#
Select Add hotspot .
#
Select the type of connection to be established
on the multimedia system and on the device to
be connected.
Connecting using a security key
#
Select the options
r
of the desired Wi-Fi
network.
#
Select Connect using security key .
MBUX multimedia system 191
T447 0414 02